Is there a big difference between the processing of zinc-aluminum die-casting squares and cylinders?
The main points are as follows:
1. Different material cutting methods: the processing of square zinc-aluminum die castings usually requires milling machines, drilling machines and other equipment for cutting, while the processing of cylinders usually requires lathes for cutting.
2. Different cutting methods: when processing square zinc-aluminum die castings, cutting methods in different directions are required, such as horizontal cutting, vertical cutting and other compound processing machines, while when processing cylinders, the cutting direction is mainly along the axis.
3. Different equipment: The equipment needed to process square zinc-aluminum die castings is usually more diverse, such as milling machines, drilling machines, tapping machines, etc., while only lathes are needed to process cylinders, such as vertical or parallel drilling , Tapping is still based on the compound processing machine as the main process arrangement.
4. Difficulty in processing: Since square zinc-aluminum die castings need to be cut in many directions, the processing is relatively difficult, while the processing of cylinders is relatively smooth, and the complexity of the process is still formulated based on precise conditions.
Our experience: The difference between the processing of square zinc-aluminum die castings and cylinders mainly lies in the material cutting method, cutting direction, equipment and processing difficulty.
The picture above shows the difference in the appearance of die-casting square aluminum frame edge processing and aluminum die-casting round objects.